Bosch HSG738356M Notice D'utilisation page 12

Operating the rotary spit
The rotary spit can be used with excellent results to cook joints
such as rolled roasting joints and poultry. The meat is roasted
thoroughly and evenly.
Use the rotary spit in conjunction with the grill.
Preparing joints
Place the joint as centrally as possible on the rotary spit and
1.
secure it at both ends with the retaining clips.
In addition, the joint can be fixed in place with cooking string.
With poultry, bind the ends of the wings underneath the back
2.
and the thighs against the body. This prevents them from
overbrowning.
Pierce the skin on the underside of the wings to allow the fat
3.
to escape.
Inserting the rotary spit
:
Risk of burns!
Never touch the hot surfaces of the cooking compartment or
the heating elements. Children must be kept at a safe distance
from the appliance at all times. Open the appliance door
carefully. Hot steam may escape.
Slide the rotary spit shelf halfway in at shelf position 2.
1.
Place the rotary spit on the rotary spit shelf and unscrew and
2.
remove the handle.
Slide in the rotary spit shelf all the way.
3.
Slide the rotary spit to the left into the motor mount.
4.
Pour water into a baking tray and slide this into shelf position
5.
1 to collect the dripping fat.
Close the appliance door.
6.
Switching on the rotary spit
Turn the control knob for the rotary spit to the
Switching off the rotary spit
Turn the control knob for the oven to the
12
F position.
position.
Û
Removing the rotary spit
:
Risk of burns!
Never touch the hot surfaces of the cooking compartment or
the heating elements. Children must be kept at a safe distance
from the appliance at all times. Open the appliance door
carefully. Hot steam may escape.
:
Risk of burns!
Never touch the rotary spit or other accessories directly when
they are hot. Always wear oven gloves or heat-resistant gloves
when handling hot accessories.
Open the appliance door carefully.
1.
Using the metal hook, pull the rotary spit to the right out of
2.
the motor mount.
Pull the rotary spit shelf halfway out of the oven.
3.
Hold the rotary spit in place on the left-hand side with an oven
4.
glove and screw the handle onto the rotary spit.
Lift the rotary spit carefully out of the rotary spit shelf.
5.
Remove the rotary spit shelf and the baking tray from the
6.
oven.
Operating the electronic clock
Setting the time
After the appliance has been connected to the mains for the
first time or after a power cut, three zeros flash in the display.
Press the button.
0
1.
Set the current time with the "+" and "-" buttons.
2.
Setting the timer
The timer has no influence on the functions of the oven.
Press and hold the "+" button until the desired time is
1.
displayed.
Release the "+" button.
2.
An audible signal sounds once the time has elapsed.
Notes
The set time can be changed at any time using the "+" and "-"
■
buttons.
If the timer is running, the current time can be shown by
■
pressing the button.
0
Switching off the acoustic signal
Press the "-" button to switch off the acoustic signal.
After seven minutes, the signal switches off automatically.
Changing the audible signal
The acoustic signal can be changed to three levels. To do this,
press the "-" button until the desired signal is set.