GYS 082564 Manuel D'utilisation page 8

User manual
Installation:
• Before carrying out installation or wiring work on the device, the
batteries must be electrically disconnected from the assembly
to eliminate any risk of accidental short-circuiting.
• All wiring, crimping and assembly operations must be carried
out by a qualified person using the appropriate tools. Incorrect
crimping or incorrect assembly of the cables can lead to excessive
heating, which can damage the wiring insulation, create a short-
circuit, or even cause a fire.
• The installer is responsible for the correct sizing and installation
of the equipment.
• Any inputs/outputs on the device that are connected to a battery
must be protected by appropriately rated external fuses.
Maintenance:
• Maintenance should only be carried out by a qualified person.
• Never use solvents or other aggressive cleaning agents.
• Clean the surfaces of the unit with a dry cloth.
Regulations:
• Equipment complies with European directives.
• The Declaration of Conformity is available on our website.
• This equipment conforms to UK requirements.
• The UK Declaration of Conformity is available on our website
(see cover page).
• Device complies with Moroccan standards.
• The C‫( م‬CMIM) declaration of conformity is available on our
website.
Disposal:
• This machine is subject to selective collection. Do not dispose
of in domestic waste.
8
Translation of the original
instructions
BATTERY COUPLER 12 V / 140 A