Publicité
Les langues disponibles
Les langues disponibles
F. Hydraulic connections
Allow at least 25 cm of space around the unit in order to not
obstruct the air flow and obtain an optimal output. For discharge,
it is necessary to allow 1 free metre of air.
Ensure that you install the unit in a place protected from bad
weather and frost.
For outside installation and to prevent frost, the antifreeze fluid kit
is required.
Two containers are required to fill the installation.
Ensure that the warm air produced by the appliance is discharged
into a sufficiently ventilated and sheltered room. (If this is not the
case, use a >350 m
/hr air extractor).
3
Ensure there is nothing that could impede blowing and suction of
the appliance's panels.
16
A
B
UP assembly
C
D
Unit intake blue
Unit return red
sleeve.
sleeve.
A
Hydraulic hose L: 30 cm or 90° elbow
B
Cover the hose insulant with Armaflex
and secure it with a clamp.
C
30 cm hose
D
Red hose of the connecting KIT
E
Blue hose of the connecting KIT
E
Publicité
