FMS 1400mm Pitts Manuel D'utilisation page 8

E
N
Model assembly
2. Install the wing spar between the two upper wing
halves.
3. Secure the upper wing onto the mounting bracket by
using the included screws and retainer as shown in the
diagram.
4. Once both wing halves are aligned, push the inter-
plane strut rearwards to lock the structure.
5. Connect the aileron pushrods between the
upper and lower wings as shown in the diagram.
Propeller installation
1. Assemble the propeller and spinner in the order
shown.
HKM3.0*10mm
a
e
c
d
b
f
HKM3.0*10mm
8