FMS 1400mm Pitts Manuel D'utilisation page 5

Model assembly
Main landing gear assembly
1.Apply screw nuts to the plastic parts as shown.
2. With the fuselage inverted, install the landing gear
assembly and retainer then secure it with screws as
shown in the diagram.
Lower wing assembly
1. With the fuselage still inverted, install the wing
spar and the wing halves. Secure the wing sections
with the inclulowerde screws.
M3 screw nut
5
KA2.0*8mm
HKM3.0*20mm
HKM3.0*10mm
E
N