Pelgrim SLK620 Notice D'utilisation page 22

22 maintenance 2
Fitting the carbon filter
SLK620/650/680/980
Centre the carbon filter with the
sunken round surface on top of the
motor frame and turn it to the right.
Removing filter panel/changing the light bulbs
First switch the electricity off.
MSL600/SLK650
Pull out the visor (C). Press the handle
D
(D) slightly. Remove the filter panel
Remove the carbon filter (if applicable)
to change the lamp.
B
C
Remove the plastic cover (B) to change
the light.
SLK620
Pull out the visor (C). Press the handle
(D) slightly. Remove the filter panel
Remove the plastic cover to change
the light.