Pelgrim SLK620 Notice D'utilisation page 21

21
control/maintenance
Intensive setting (SLK680/980)
You can temporarily switch the extractor hood to the highest setting – in order,
for example, to remove the odour quickly if something has burned.
Press switch to switch to the intensive setting. The extractor hood switches
to its highest setting (4) for 5 minutes, and then switches back to the original
setting.
Timer (SLK680/980)
Press switch , or
selected setting for 5 minutes, after which the extractor hood and the lighting
are automatically switched off.
Grease filter indication (SLK680/980)
The degree of saturation of the grease filter is indicated by means of a
luminous display.
If button is pressed when the extractor hood is switched off, the display
lights up; the colours displayed have the following meanings:
green light: in use for less than 6 working hours
■
yellow light: in use for 6 to 12 working hours
■
red light: in use for more than 12 working hours (the grease filter should be
■
cleaned or, if necessary, replaced).
Carbon filters
The carbon filter must be used if the cooker hood is not connected to a duct
(see extraction systems on page 19).
Note:
■ The carbon filter must be replaced at least twice a year, depending on how
much the cooker hood is used.
Carbon filters cannot be cleaned to use again.
■
■ Saturated carbon is harmful to the environment, replace the filter regularly.
for 2 seconds. The extractor hood remains at the