Publicité
1
4
4
5
RED
GREEN
14
icklebubba.com
2
EN:
Usage of the ISOFIX
WARNING: Ensure that
your vehicle has ISOFIX
anchorage points.
1. Insert ISOFIX guides to
assist with installation.
2. Place the car seat on the
ISOFIX base rearward facing
3. Press and push ISOFIX
release button on both sides of
the seat and make the ISOFIX
connectors are fully extended.
This ensures that both hooks
on the ISOFIX connectors are
open and ready to use, now
RED
both ISOFIX indicators of ISOFIX
release button show red colour.
4. Push the ISOFIX connectors
through ISOFIX guides directly
GREEN
into the anchorages until heard
an audible "click". Now both
ISOFIX indicator of ISOFIX release
button show green colour. At the
same time, push the backrest of
GREEN
the base of the enhanced child
seat as soon as possible toward
the backrest of vehicle seat until
tightly. Make sure that both ISOFIX
indicators of ISOFIX release
RED
button on both sides show green
colour so that the enhanced
child seat is correctly fastened.
5. Shake the enhanced child
seat to ensure that it is securely
fastened and check the safety
buttons to make sure that the
two indicators are fully green.
To disassemble the ISOFIX,
repeat the above prescribed
procedures in reverse order.
Publicité
