Ryobi SSP100 Manuel D'utilisation page 6

GB
FR DE ES
SPECIFICATIONS
Flow Rate
Container Size
Input
Paint area per minute
Paint area per liter
The paint sprayer can be used to apply the following
materials/applications:
1) Fencing Treatment
2) Furniture
3) Garden Furniture
4) Pesticides
5) Exterior Walls
6) Radiators
7) Garage Doors
8) Railings
9) Summer Houses
SPECIFICATIONS
10) Stables
11) Outbuildings
12) Interior Walls
OPERATION
IDEAL VISCOSITY
Water based paints and
emulsions
Oil based paints
Wood stains /
Wood preservatives
This Sprayer can be used with solutions that take
between 12 - 18 seconds to empty through the viscosity
cup. Dip the viscosity cup into the paint and fill up. Time
how long it takes for the viscosity cup to empty. See
Figure 10.
Using the above chart (or manufacture's instructions)
as a guide, determine if the material requires further
thinning, if so then thin accordingly.
If the paint requires thinning, start with a 10% dilution of
the paint. For example:
IT NL PT DK SE
20.5 Liters/Hour
1 Liter
230 V 50 Hz, AC only, 200W
2
4 m
2
10 m
= 3 x (1.8 m by 1.8 m)
Fence panels
12 – 18 seconds
12 – 18 seconds
No dilution
FI NO RU PL CZ
English
Amount of spray
material (ml)
Paint thinner (ml)
To do this, fill a 1 liter container with the required paint.
Then use the viscosity cup supplied to add 100 ml of
required thinner. Stir the contents thoroughly, measure
the viscosity using the viscosity chart above. If paint
requires further thinning then repeat the above step.
NOTE: Some paints are outside the ranges listed above.
Please contact our helpline for further information.
FILLING SPRAYER WITH PAINT/STAIN
See Figure 3-4.
Remove and discard any skin that has formed on top of
the paint or stain, then thoroughly mix the material in its
original container before beginning.
NOTE: Older containers of stain and paint may need to
be strained before use.
Unplug the sprayer.
Remove the quick-lock container by twisting
clockwise so that the arrow on the container lines up
with the "unlock" symbol on the lid.
Fill the container with paint or stain as desired. Do not
fill above the max fill mark on the container.
Reinstall the container on the sprayer and twist
counterclockwise so that the arrow on the container
lines up with the "lock" symbol on the lid.
SELECTING THE PROPER SPRAY TIP
See Figure 5.
To switch tips:
Unplug the sprayer.
Remove the installed tip by turning it counter-
clockwise.
Install the desired tip and rotate clockwise to tighten
securely.
2
HU RO LV LT EE
1000 2000
100
Use the Round Tip for thinner diluted paints
and stains. This tip sprays in a round pattern.
Ideal for outdoor fence spraying.
Use the Fan Tip for thicker or non diluted
paints. This tip sprays in a wide pattern,
giving a fine professional finish. It can be
adjusted from horizontal to vertical. Ideal for
indoor wall spraying.
HR SI SK GR TR
3000 4000
200 300 400