Publicité
Les langues disponibles
Les langues disponibles
en-us Cleaning and maintenance
Part
Suitable cleaning method
Wire rack
¡ Wash with soapy water.
¡ Rinse thoroughly and dry, or gently rub with
Glass turntable
¡ Wash in warm soapy water or in the
Turntable roller rest
¡ Clean with warm, soapy water. Rinse
Door glass
¡ Wash with soap and water or glass cleaner,
¡ If steam accumulates inside or outside the
Painted surfaces
¡ Clean with hot soapy water or apply all
Stainless steel
¡ Clean with a soapy sponge, then rinse and
surfaces
¡ Protect and polish with Stainless Steel
¡ Remove water spots with a cloth dampened
Plastic and controls
¡ When cool, clean with soapy water, rinse
Printed areas (words
¡ Clean with soapy water, rinse and dry.
and numbers)
12.2 Cleaning the vent filters
The vent filters should be removed and cleaned
frequently, generally at least once every month.
CAUTION
To avoid risk of personal injury or property damage, do not
operate the vent without the filters properly in place.
28
cleansing powder or soap-filled pads as
directed.
dishwasher.
thoroughly and dry.
or apply all purpose cleaner on a clean
sponge or paper towel and wipe clean.
appliance door, wipe it off with a soft cloth.
Steam can accumulate when operating the
appliance in high humidity. This does in no
way indicate microwave leakage.
purpose cleaner to a clean sponge or paper
towel and wipe clean.
dry, or wipe with Fantastik® sprayed on a
paper towel.
Magic® and a soft cloth.
with white vinegar.
and dry.
Recommendations
¡ Let the glass turntable cool off before
handling it.
¡ Remove the glass turntable from the
appliance cavity for cleaning.
¡ DO NOT put the glass turntable in water
immediately after cooking; it may break.
¡ Do not use abrasive cleaners, like powder
cleaning agents, steel wool pads and oven
cleaners.
¡ Do not use abrasive cleaners, like powder
cleaning agents, steel wool pads and oven
cleaners.
¡ Always wipe or rub in the direction of the
grain.
¡ DO NOT use any cleanser that contains
chlorine as these may rust the stainless
steel.
¡ DO NOT use abrasive cleaners or petroleum
based solvents.
To remove the vent filters, slide the filter to the rear.
1.
Then pull the filter downward and push it to the other
side. The filter drops out. Repeat for the second filter.
Soak the vent filters in hot water using a mild detergent.
2.
Rinse well and shake to dry.
Publicité
