Retrospec Koa Instructions De Montage page 13

6.3 Speed/Single Trip/ODO
6.3.1 Speed
Short press the [MODE] button to switch the speed information, and speed
(real-time speed), AVG (average speed) and max (maximum speed) are displayed
respectively, as shown below.
Real-Time Speed
6.3.2 Single trip/ODO
Long press [MODE]+ [DOWN]
button to switch the mileage
information, and the indicate is:
ODO (cumulative mileage) →TRIP
(single trip) as shown on the right.
6.4 Walk assist mode
When the display is turn on, hold the [DOWN] button for 2
seconds, the e-bike will enter the state of walk assist mode.
The e-bike travels at a constant speed of 6km/h.
The walk assist mode function can only be used when the
user pushes the e-bike. Do not use it when riding.
23
AVG Speed MAX Speed
ODO Trip
Single Trip
Walk Assistant
Interface
6.5 Headlight On/Off
Hold the [UP] button to display the interface as shown, and the icon
indicating that the lights have been turned on. Long press the [UP] button again to
turn off the lights.
Headlight On
Interface
6.6 PAS Level Selection
Short press the [UP] or [DOWN] button to switch the PAS level, the motor output
power will be changed accordingly by the PAS level of E-bike. The default range
of PAS level is 0-6 levels. Level 1 is the lowest output level, and the level 5 is the
highest output power level of the motor.
appears,
24