AYA ATV3F/2 Manuel D'utilisation page 62

flash(1 time/S),and it will keep flashing until end of the
timer.
9.1 Partition timing
The hob timer can be used as a minute minder for any of the
cooking zones without affecting the cooking process or power
setting of each burner,and each value can be different.
Single cooking zone timing

When setting a countdown time for a cooking zone,press

timer button first,the indicator light of the selected cooking
zone will flash display, the decimal point of digital tube will
display,and to indicate the set timer has been related with
the selected cooking zone.At this time,you can use the
plus button and minus button to set the countdown time.
Several cooking zones timing

Each timer setting operation will be same as "Single

cooking zone timing".As long as setting a countdown time
for the burner,the corresponding indicator light of that
burner will flash.
Press any of the cooking zone select button,the digital

tube will show the timer value of that burner.
When not selecting any burner,the digital tube will show

the minimum timer value of all burners, that is associated
with the cooking zone of the cookingzone indicator lamp.
9.2 Default timing
All of t he 3 cooking z ones ha ve d efault timing f unction,if

not setting t he ti mer m anually, the r elationship o f d efault
timing and power level refers to table below:
Power Level
Default
timing
1 2
6h 6h
EN-23
3 4
5h 5h
5 6-9
4h 1.5h