AYA ATV3F/2 Manuel D'utilisation page 53

connection diagram is also found on the cover of the
connection box. Remember that the connection wire should
match the connection type and the power rating of the
ceramic hob.
The connection cable must be secured in a strain-relief clamp.
Warning!
Remember to connect the safety circuit to the connection
box terminal marked with
ceramic hob must have a safety switch which
enables the power to be cut off in case of emergency. The
distance between the working contacts of the safety switch
must be at least 3mm.
Before connecting the ceramic hob to the power supply it is
important to read the information on the data plate and the
connection diagram.
wires for each domino hob with touch control models
Adaptive voltage
220-240
model
50-60Hz
ATV3F/2 H05VV-F
The cable connections must b e in accordance w ith t he

diagram located on the bottom of the hob.
range and wires
380-420
1N～ 2N～
50-60Hz
H05VV-F
3G2.5 4G2.5
.The electricity supply for the
The wiring diagram
KADO K 1/5
EN-14