Communication Errors - IEM Tel-O-Graph GSM Mode D'emploi

Fault
Cause
description
Err 10 Internal error.
7.2

Communication errors

Fault
Cause
description
Registration with mobile
Cod 1
network not possible.
Cod 2 No GSM connection.
Cod 3 Could not send readings.
Cod 4 Communication error.
Invalid target data in
Cod 5
EEPROM (memory).
Remedy
If this error occurs repeatedly, send the monitor to your retailer or
directly to the manufacturer for checking.
Remedy
Move to a location with better mobile network reception.
If this error occurs repeatedly, contact the specialist dealership.
Move to a location with better mobile network reception.
If this error occurs repeatedly, contact the specialist dealership.
Take another measurement and check whether the readings are
transmitted.
If this error occurs repeatedly, contact the specialist dealership.
If this error occurs repeatedly, contact the specialist dealership.
If this error occurs repeatedly, contact the specialist dealership.
Error messages
EN
67