Memory - IEM Tel-O-Graph GSM Mode D'emploi

6

Memory

Saving readings
Fig. 9: Number of readings
The monitor can save 15 blood pressure readings and
15 pulse rate readings.
i
Only readings that have not yet been transferred to
the database are saved.
If there are more than 15 readings, the oldest data is
overwritten by the new readings.
i
The data in the database is retained and is not
overwritten.
The number of readings is shown on the display (Fig.
9).
Deleting readings from the monitor
To clear the memory on your monitor, proceed as
follows:
Fig. 10: Delete measurements
1) Press and hold the
monitor for about 5 s.
 The display shows [IP] (Fig. 10/A).
i
The display automatically shows each menu
entry for 5 seconds. The display order is:
Mobile network transmission [IP]

transmission [IR]
values (c lr)
Memory
– button on the

Infrared
Delete measurement
EN
63