Error Messages; Blood Pressure Measurement Errors - IEM Tel-O-Graph GSM Mode D'emploi

7

Error messages

7.1

Blood pressure measurement errors

The monitor indicates blood pressure measurement errors and communication errors by emitting 12 short acoustic
signals.
Fault
Cause
description
Arm moved during
measurement.
Err 1
Insufficient valid pulse
rate detected.
Arm moved during
measurement.
Err 2
The cuff is not correctly
positioned.
Blood pressure beyond
the measurement range.
Err 3
Strong arm movement.
Remedy
Keep your arm still during the measurement (

Reposition the cuff ( Chapter 5.2).
Keep your arm still during the measurement (
Check that the cuff is fitted properly (
If this notification appears continuously (or repeatedly), it is possible
that the monitor is not suitable for you. Contact your doctor.
Keep your arm still during the measurement (
Error messages

Chapter 5.3).

Chapter 5.3).

Chapter 5.2).

Chapter 5.3).
EN
65