Publicité
4-1. Important Information Regarding CE Products (Sold Within The EU)
!
This equipment shall not be used by the general public as the EMF limits for the general public might be exceeded during welding.
This equipment is built in accordance with EN 60974−1 and is intended to be used only in an occupational environment (where the general public
access is prohibited or regulated in such a way as to be similar to occupational use) by an expert or an instructed person.
Wire feeders and ancillary equipment (such as torches, liquid cooling systems and arc striking and stabilizing devices) as part of the welding
circuit may not be a major contributor to the EMF. See the Owner's Manuals for all components of the welding circuit for additional EMF exposure
information.
S
The EMF assessment on this equipment was conducted at 0.5 meter.
S
At a distance of 1 meter the EMF exposure values were less than 20% of the permissible values.
4-2. Serial Number And Rating Label Location
The serial number and rating information for this product is located on the feed roller guard. Use rating label to determine input power requirements
and/or rated output. For future reference, write serial number in space provided on back cover of this manual.
4-3. Specifications
Wire Feed
Model
Speed Range
RAD−400
20 To 400 ipm
(0.5 To 10 mpm)
RAD−400T
30 To 780 ipm
RAD−780
(0.7 To 19.8 mpm)
4-4. Description
.
RAD motor shown without feed roller guard.
OM-1598 Page 12
SECTION 4 − INSTALLATION
Wire Diameter
Input Weld
Range
Circuit Rating
100 Volts
3/32 To 7/32 in.
1000 Amperes
(2.4 To 5.6 mm)
100% Duty Cycle
100 Volts
1/16 To 1/8 in.
1000 Amperes
(1.6 To 3.2 mm)
100% Duty Cycle
Type Of
Rating
Input Power
1/4 HP,
115 VDC
85 RPM
1/4 HP,
115 VDC
143 RPM
1
Input
Weight
Power
Cord
24 in.
33 lb
(0.61 m)
(15 kg)
24 in.
33 lb
(0.61 m)
(15 kg)
1
Motor/drive Assembly
This unit is a heavy-duty wire feed-
ing motor/drive assembly designed
for automated Submerged Arc
Welding (SAW) applications.
The various model designations in-
dicate information about the specif-
ic model. The units are offered in ei-
ther low speed or standard speed
drives.
Ref. 804 965-A
Publicité
