Festo DNCM POT Série Notice D'utilisation page 19

DNCM−...−POT
4 Transport and storage
Take the weight of the DNCM−...−POT into
S
consideration.
Depending on design the DNCM−...−POT
weighs more than 10 kg.
Ensure storage conditions as follows:
S
short storage periods in cool, dry, shaded
and corrosion−protected locations.
5 Conditions of use
With electronically closed−loop control of the DNCM−...−POT:
Please note
Special conditions apply to the electronically closed−loop control of the
DNCM−...−POT:
S Observe the instructions in the manuals for positioning controller type SPC−...
(Soft Stop).
Please note
Incorrect handling can lead to malfunctioning.
S Make sure that the requirements in this chapter are always observed.
The product will then function correctly and safely.
Compare the maximum values in these operating instructions with your actual
S
application (e.g. pressures, forces, torques, masses, speeds, temperatures).
The DNCM−...−POT can only be operated in accordance with the relevant safety
guidelines if the maximum loading limits are observed.
Festo DNCM−...−POT 0608a English
Fig. 3
19