Makita PRM0600 Manuel D'utilisation page 111

MAINTENANCE
6.2.3 E
NGINE
Follow all the instructions in the engine man-
ual.
To drain the engine oil:
1. unscrew the topping up cap (1);
2. fit the pipe (2) onto the syringe (3) and
insert it right into the hole;
3. using the syringe (3), suck up all the en-
gine oil, bearing in mind that you need to
repeat this operation a few times before
all the oil is removed.
6.2.4 G
EAR LEVER AND DIFFERENTIAL
These are sealed single units which do not require maintenance. They are per-
manently lubricated and this lubricant does not need changing or topping up.
6.2.5 B (
ATTERY
To ensure long life to the battery it is essential to keep it carefully maintained.
The machine battery must always be charged:
– before using the machine for the first time after purchase;
– before leaving the machine for a prolonged period of disuse;
– before starting up the machine after a prolonged period of disuse.
– To ensure long life to the battery it is essential to keep it carefully main-
tained. Failure in following the procedure or in charging the battery could
permanently damage the battery elements.
– A flat battery must be recharged as soon as possible.
IMPORTANT
stant voltage. Other recharging systems can irreversibly damage the bat-
tery.
➤
Only in the electric start models)
Recharging must be done using a battery charger at con-
3
1
EN 29
2