Makita PRM0600 Manuel D'utilisation page 105

HOW TO USE THE MACHINE
5.4.8 E
ND OF MOWING
When you have finished mowing, disengage the blade, lower the engine speed
and ride the machine with the cutting deck in the highest position.
5.4.9 E
ND OF WORK
Once you have finished mowing, stop the machine and engage the parking
brake.
➤
In the electric start models:
1. shift the accelerator lever to «SLOW»;
2. switch off the engine by turning the key to «STOP»:
WARNING!
!
machine unattended!
IMPORTANT
«ON» position when the engine is not running.
➤
In the manual start models:
1. shift the accelerator lever to «OFF».
WARNING!
!
«OFF» position before leaving the machine unattended!
5.4.10 C
LEANING AND STORAGE
WARNING!
!
tainers full of cut grass inside a room.
After each mowing, clean the outside of the machine, empty the grass-catcher
and shake it to remove residual grass and earth.
Clean the plastic parts of the body with a damp sponge using water and deter-
gent, taking care not to wet the engine, the electrical parts or the electronic card.
IMPORTANT
body and engine!
Always take out the ignition key before leaving the
To keep the battery charged, do not leave the key in the
Always make sure that the accelerator level is in the
Always empty the grass-catcher and do not leave con-
Never use hose nozzles or harsh detergents for cleaning the
EN 23