Publicité
RMUXF40/RMUXF100 70V/100V Transformer Kit Accessory
The 70V/100V transformer kit is available in 40-watt and 100-watt versions. Both versions fit all RoomMatch Utility models, after
removing the standard connector panel.
Removing the standard connector panel
1.
Remove the four screws on the rear connector panel (Figure 9).
Figure 9. Removing rear connector panel
Speaker cable
2.
Gently remove the connector panel from the speaker cabinet.
Note: The connector panel has a gasket that may cause some resistance when attempting to remove the connector panel. It may be
necessary to lift one edge away from the speaker cabinet using a small blade screwdriver or another similar tool.
3.
Disconnect the speaker cable from the connector panel.
Installing the transformer kit
1.
Connect the transformer kit cable to the speaker cable (Figure 10).
Figure 10. Installing transformer kit on speaker cabinet
Speaker cable
2.
Place the transformer kit on the speaker cabinet and secure it with four screws.
Installation and Safety Guidelines
Model
Description
RMUXF40W
40W 70V/100V Transformer Kit
RMUXF100
100W 70V/100V Transformer Kit
Connector panel
Transformer kit
Product Codes
720562-0010
720367-0010
Installation
English 11
Publicité
