Technical Data; Safety; Declaration Of Conformity; Safety Instructions - WOLFF VARIO BRAVO-STRIPPER 013343 Mode D'emploi

Comes with
BRAVO-STRIPPER
blade 210 x 60 x 1.5 mm
blade 210 x 60 x 1 mm
blade 210 x 60 x 0,7mm
tool kit
additional weight
ear protectors
safety gloves
operation manual
Always wear ear protectors!
09/2002 VARIO-STRIPPER , Artikel-Nr.

1.0 Technical Data

Power supply . . . . . . . . . . . . . . . . . . . . . . . .230 V AC (115 V)
Power consumption . . . . . . .2000 W, 11 A, with current limitor
Power motor drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . .620 W
Number of strokes . . . . . . . . . . . . . . . . . . . . . . . . .8500 r.p.m.
Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 to 10 m/min
Sound pressure level . . . . . . . . . . . . . . . . . . . . . . . . .88 dB(A)
Sound energy level . . . . . . . . . . . . . . . . . . . . . . . . .101 dB(A)
Hand/Arm-Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . .16 m/s
Weight . . . . . . . . . . . . . . . . .45 kg + 20 kg (additional weight)
2.0

Declaration of conformity

We declare under our sole responsibility that this product is
in conformity with the following standards of standardization
documents: EN 50 144, according to the provisions of the
Directives 73/23/EWG, 89/336/EWG 98/37 EG
05
WOLFF | Eine Marke der Uzin Utz Gruppe | D-71665 Vaihingen/Enz | Dieselstraße 19

3.0 Safety instructions

Disconnect the power supply before any maintenance is carried
out.Use only recommended blades and ensure it is sharp before
starting.
Maintenance should be undertaken only by qualified personnel.
Use only genuine Wolff spare parts.

Transport

To avoid harm or danger, always remove the blade before
transporting the machine.
Using this machine without ear protectors may jeopardize or
harm your health. It may harm especially your ears and increase
the risk of an accident.
The user and any person not far off should always use ear
protectors!
3.1 Introduction
This operating manual should be used to get the most benefit
from your BRAVO-STRIPPER.
Following these instructions will both extend the life of your
machine and reduce repair costs. Please ensure any user of the
machine is fully familiar with the instructions for use before
allowing work to start.
013343Fu
Dipl.-Ing. (FH) Dieter Hammel
Konstruktionsleitung
i.V.
2
10