CLAS AC 8744 Mode D'emploi page 43

AUTOMATIC BUS AIR CONDITIONER STATION R1234yf
AC 8744
AUTOMATIC BUS AIR CONDITIONER STATION R134a
AC 8944
Pipe length
Set the length of the charging hoses currently in use (the default length is 3,000 cm, which may
vary depending on your unit model).
NOTE: If the hose length is set to the correct hose length, the station will automatically calculate
the amount of refrigerant remaining in the charging hoses after service. This residual refrigerant is
then automatically recovered in the internal tank. If, on the other hand, the hose length has been
set to «0», the unit will guide the user to recover the residual gas remaining in the A/C system's
hoses, instead of reclaiming it from the unit.
PIPE LENGTH
PRINT. RECOVERED GAS
The parameter configures whether the amount of refrigerant recovered from the vehicle's A/C
system is to be printed (YES / NO). Press ENTER to confirm your choice.
PRINT. RECOVERED GAS
INFO
The menu provides a series of information about your device:
- Model- Serial number
- FW version- Name (of the station to identify the station)
On the next page (press the INCREASE button to change page):
- Cylinder capacity
- Refrigerant used
AC 8744
PIPE LENGTH
PRINT. RECOVERED GAS