Human Touch WholeBody Rove Mode D'emploi Et D'entretien page 7

4. Zip both sides of the body pad to the chair; the zippers start at the
top of the backrest (Fig.10).
Zippers
5. Remove the protective backing from the hook-and-loop fasteners on the back of the lower body pad,
align the fasteners with the fasteners on the foot and calf massager upholstered flap, then press down
on the body pad to secure it to the chair (Fig.11).
Protective backing
humantouch.com
Fig.10
Fig.11
10
Install the Tablet Remote
1. Locate the tablet remote connector on the right-hand
side of the chair seat (Fig.12).
2. Matching the tablet remote connector pins with the
corresponding holes in the tablet remote connector on
the chair, connect the connectors (Fig.13).
3. Turn the connector lock clockwise to secure it (Fig.13).
Fig.12
Fig.13
11