Publicité
Les langues disponibles
Les langues disponibles
4. Reinstall a clip onto each mounting post with the tongue facing
to the right, to secure the massager to the chair (Fig.5).
Clip
5. Remove the protective backing from the hook-and-loop
fasteners on the back of the foot and calf massager
upholstered flap, then press the flap onto the chair base
to secure it (Fig.6).
Protective backing
humantouch.com
Fig.5
Fig.6
Flap
8
Install the Body Pad
1. Locate the heat cable on the left-hand side of the chair seat and the
corresponding cable coming from the body pad (Fig.7).
Body pad heat cable
2. Connect the heat cables until you hear a click, indicating that
the connection is properly secured (Fig.8).
3. Slide the protective rubber casing over the connection to
secure it (Fig.9).
Chair heat cable
Fig.7
click!
Fig.8
Fig.9
9
Publicité
