Publicité
Les langues disponibles
Les langues disponibles
care and
maintenance
To keep your product working and looking its best, please follow these simple
care guidelines.
WARNING:
1. Be sure to disconnect the power cord from the electrical outlet before cleaning.
2. When cleaning the remote control or power switch, use a dry cloth only. Never use a damp cloth to clean any
.
electrical component
CAUTION:
1. Be sure to test any cleaning solution on a small, inconspicuous part of the product to ensure that the color does not
fade prior to using the solution on the entire product surface.
2. Do not use benzene, thinner or any other solvents on your product.
Cleaning Code Standard for SofHyde or Cloth: W
To maintain your Human Touch product in optimum condition, dust it frequently and/or vacuum it with a soft brush vacuum
extension. If your product becomes dirty, use a water-based upholstery cleaner only. To treat stains, spot clean with an
upholstery shampoo or a mild detergent foam. To clean the foot/calf massage well inserts, remove the inserts from the chair,
hand-wash with a mild detergent, then line dry.
Maintenance and Repair:
1. The mechanics of this product are specially designed and constructed to be maintenance free. No periodic
lubrication or servicing is required.
2. Your chair should only be serviced by a Human Touch-authorized service representative.
Use and Storage Environment:
1. Do not place the chair in direct or reflected sunlight, as ultraviolet rays will quickly fade the upholstery color and
cause the SofHyde upholstery to rapidly deteriorate.
2. Operate your chair in a room temperature between 41 and 104 degrees Fahrenheit (5 to 40 degrees Celsius) with
humidity levels of 10% to 70% (non-condensing) to avoid damage.
3. To prevent damage to the upholstery, before sitting in your chair make sure there are no sharp objects in your pockets
and no metal buttons or zippers that can come in contact with the chair.
4. Do not place the chair where excessive dust and pet hair can migrate into the chair's electrical and mechanical
components; this can cause malfunction over time.
5. When not in use for a long period of time, we recommend that the chair be covered, the power cord be coiled, and
that the unit be placed in an environment free of dust and moisture.
6. Store your chair in a room temperature between 5 and 122 degrees Fahrenheit (-15 to 50 degrees Celsius) with
humidity levels of 10% to 70% (non-condensing) to avoid damage; product stored in cold temperatures may require
48 hours at room temperature to function properly.
7. Do not store near open heat or flame.
humantouch.com
20
In Case of a Power Surge
Your massage chair contains a built-in fuse to protect itself from a power surge. In the event of a power surge, inspect the
fuse and replace it if it is blown.
To replace a fuse:
1. Power OFF the chair and unplug the chair from the wall outlet.
2. Pry the fuse holder from the compartment adjacent to the power plug input (Fig.20).
3. Replace the fuse with a new fuse of the same value as the fuse provided with the chair and listed on the fuse
compartment cover, then reinsert the fuse holder into the compartment.
4. Plug the chair back into the wall outlet and power it On.
Fuse holder
3.15A
ON/OFF
3.15A
ON/OFF
Fig.20
21
Publicité
