Garland FUM 250G-V19 Manuel D'instructions page 35

10. TRANSPORT
Always transport the machine with the engine
switched off.
Once the machine is turned off, wait 5 minutes to
allow it to cool before transporting it
When transporting the machine, we recommend that
you release the suction and discharge hoses.
Remember that this machine does not have wheels
for transportation and that you must raise it by the
frame. Check the technical weight of the machine in
the technical characteristics section before lifting it to
ensure that it is a weight that you can withstand.
Always transport the machine in a horizontal position.
If you are transporting the machine in a vehicle ground
it firmly to prevent slipping or tipping over.
11. STORAGE
Wait 5 minutes for the machine to cool once it has
been turned off.
The machine's exhaust pipe will remain hot after
turning off the engine. Do not ever store the machine
in places near flammable materials gas or fuels.
Store this tool in a safe place not accessible to
children so that it does not endanger any person.
When not in use, the machine should be stored clean,
on a flat surface. Store the machine in a place where
the temperature range is between 0° C or above 45°C
and with a relative humidity of less than 50%.
Always follow the maintenance chapter points before
storing the machine.
If you plan to store the machine in a closed place, first
empty the fuel from the tank since fumes could come
in contact with a flame or hot body and catch fire.
Clean all parts and store the machine in a safe and
dry place.
12. RECYCLING OR DISPOSAL OF
YOUR MACHINE
Dispose of your appliance sustainably.
We should not get rid of machines
with domestic waste. Plastic and metal
components can be classified according to their
nature and recycled.
The materials used to pack this machine
are recyclable. Please do not throw the
packaging away with domestic trash. Throw
these packages away at an official collection point.
35/96
English