Using The Preset Cooking Modes - BASETech CM-2501 Notice D'emploi

• Use the +/- dial to select a temperature between 0 and 120 ºC. Confirm your selection with the MANUELL (manual)
button. The timer duration (minute value) will flash on the LCD display.
• Use the +/- dial to select a duration between 0 and 90 minutes. Confirm your selection with the MANUELL (manual)
button. The second value will flash on the LCD display.
• Use the +/- dial to set the second value. Confirm your selection with the MANUELL (manual) button.
" " will flash and the preset speed setting will be shown on the LCD display.
If you do not press any buttons for 15 seconds, the multi-cooker will automatically exit the manual settings
mode and "88:88" will be shown on the LCD display. The multi-cooker will then enter standby mode if no
buttons are pressed for a further 3 minutes, and the LCD display backlight will flash. To exit standby mode,
press any button (apart from the on/off button (5)).
If the timer is not set, the multi-cooker will turn off automatically after 60 minutes. The elapsed time will be
shown on the LCD display.
Press the STOPP (stop) button (D) to reset the timer and other settings. "88:88" will be shown on the LCD
display.
d) Using the preset cooking modes
• The multi-cooker comes with 5 preset cooking modes for steaming food ( ) and making soups ( ), jam ( ),
sauces ( ) and dough ( ). The temperature, speed, and timer are set automatically and cannot be configured
manually. The TURBO button (F) cannot be used.
• Each cooking mode consists of several stages (apart from the kneading and steaming modes). You will hear
5 beeps after each stage is complete, and the cooking process will pause for 1 minute so that you can add
ingredients through the refill opening (16).
• Press the AUTO button to select the desired cooking mode. The corresponding symbol will flash on the LCD
display.
• You will hear 10 beeps when the cooking program has finished.
• The following table provides information on the temperature, speed settings and time for each stage of the cooking
process.
Cooking
program (total Stage with recipe ideas
duration)
Jam 1
(20 minutes)
2
Soup 1
(22 minutes)
2
3
4
5
34
Add food (such as fruits) to the mixing jug.
Add sugar and honey and heat until cooked.
The multi-cooker heats the empty mixing jug.
Add butter (or oil), onions and minced garlic to the
mixing jug.
Add chopped pumpkin and water.
The multi-cooker will blend the ingredients.
Add milk, salt, cinnamon or other spices.
0 3 mins
100 17 mins
100 2 mins
100 1.5 mins
100 14 mins
-- 3 mins
100 1.5 mins
5
1
0
1
1
7
5