The multi-cooker will automatically exit weighing mode and display "88:88" when the scales are not used
for 2 minutes. It will then enter standby mode after a further 3 minutes and the LCD display backlight will
flash.
The maximum load of the scales is 4000 g. If "FOFF" is displayed, this indicates that the maximum load has
been exceeded and you should remove the load from the scales immediately.
The contents of the mixing jug must not exceed the maximum volume of 2 l / 2 kg.
You cannot weigh food when the motor is moving.
c) Manually configuring the cooking settings
Overview of different preparation methods
Preparation
Food
method
Heating, cooking
Liquids (max. 2 l)
Stirring
Liquids (max. 2 l)
Crushing
Ice cubes (max. 300 g)
Chopping, mixing Vegetables
Coffee beans (max.
Grinding
200 g)
Carrots and water
Blending
(max. 2000 g)
Egg white (at least 2)
Whisking
Cream
Vegetables
Steaming
Fish fillet
Kneading
Dough
Manually setting the speed, temperature and timer
• Press the MANUELL (manual) button (B). " " will flash and "00 S" will appear on the LCD display.
• Turn the +/- dial (C) clockwise to increase the speed, or anticlockwise to decrease the speed. The current
speed setting is shown on the LCD display (3). There are 10 speed settings for non-heating programs,
and 5 speed settings for heating programs. Confirm your selection with the MANUELL (manual) button.
" " will flash and "00 ºC" will appear on the LCD display.
Attachments
Instructions
Choose a low speed setting to prevent the food
Blade unit
from burning.
Blade unit
Hold down the Turbo button (F) for 10 seconds,
Blade unit
and then repeat 6 times.
Cut up large pieces of food into 1-2 cm chunks
Blade unit
before placing them into the mixing jug.
Blade unit
You will need to add some liquid to the mixing
jug when processing solid foods. Add water,
Blade unit
stock, juice, cream or other liquids until the
desired consistency is reached.
Mixing
Do not choose a speed setting higher than 4.
attachment
Simmering
basket
Do not fill the mixing jug above the 0.5 L
marking.
Steaming
attachment
Blade unit
Select the kneading program.
33