Power Fist 9096686 Mode D'emploi page 6

9096686
1. Do not exceed the maximum capacity to prevent equipment failure or
damage.
2. Inspect the device before each use. Do not use if it is bent, cracked,
damaged or has been subjected to a sudden or unexpected (shock) load.
3. Ensure that all applicable pins, bolts and nuts are firmly tightened before
using.
4. Use only with accessories rated to handle the forces exerted by the device
during operation. Other accessories may break and forcefully launch
pieces.
5. Do not place your hands between moving components.
HYDRAULIC PRECAUTIONS
DANGER! Seek immediate medical attention if hydraulic fluid under
pressure penetrates your skin. See Injection Injury precautions for
instructions before using a pressurized hydraulic system.
1. Do not touch or handle, hydraulic hoses or components while under
pressure. Hydraulic fluid escaping under pressure has sufficient force to
penetrate your clothing and skin. A pinpoint hole may inject hydraulic
fluid into your body. Seek immediate medical attention if this occurs (see
Injection Injury).
2. Never exceed the hydraulic system' s load capacity (see Specifications).
3. Do not adjust the hydraulic system' s relief setting. The settings are preset
by the factory.
4. Hydraulic oil under pressure is hot and can cause a burn injury if touched,
sprayed or spilled. Allow the hydraulic system to cool before conducting
maintenance.
5. Hydraulic components require regular inspection. Release all pressure
from the system before you inspect it. Replace damaged hydraulic parts
with identical manufacturer's components.
6. Do not attempt makeshift repairs to a hydraulic system. Such repairs can
fail suddenly and create a hazardous condition.
7. A damaged or disconnected hydraulic hose under pressure may whip
around and inflict personal injury or damage the work area. Secure the
hose to a fixed or permanent structure with clamps or cable ties.
www.princessauto.com / 1-800-665-8685
CLEVIS-BOTTOM LONG-RAM PNEUMATIC/HYDRAULIC JACK V1.0
Page 6