Publicité
Les langues disponibles
Les langues disponibles
V1.0
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
DO NOT pollute the environment by allowing uncontrolled discharge of
waste oil.
HYDRAULIC FLUID DISPOSAL
Do not drain hydraulic oil into the sewer system or dispose in an uncontrolled
location. Hydraulic fluid may take more than a year to breakdown in the
environment and the ingredients may still be toxic. Contact your local
municipality for proper disposal instructions or locations.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
TROUBLESHOOTING A JACK
Problem(s)
Jack will not lift
load.
Jack will lift, but
will not maintain
pressure.
Page 15
CLEVIS-BOTTOM LONG-RAM PNEUMATIC/HYDRAULIC JACK
Possible Cause
1.
The release valve is not
closed tightly.
2.
Overloaded the jack.
3.
Air is trapped in the
hydraulic system.
4.
Hydraulic oil level is low.
1.
The release valve is not
closed tightly.
2.
Overloaded the jack.
3.
Hydraulic unit is
malfunctioning.
Suggested solution
1.
Close the release valve firmly.
2.
Reduce load or use a jack with a
greater lift capacity.
3.
Bleed air from the system.
4.
Check the oil filler hole and if
necessary, top off with more
hydraulic oil.
1.
Close the release valve firmly.
2.
Reduce load or use a jack with a
greater lift capacity.
3.
Malfunctions:
a.
Replace the seals.
b.
Have a qualified technician
service the tool.
www.princessauto.com / 1-800-665-8685
9096686
Publicité
