Power Fist 9096686 Mode D'emploi page 3

V1.0
SPECIFICATIONS
Lift Capacity
Lift Capacity
Min. Lift Height
Max. Lift Height
Operation
Ram Travel
Retracted Length Pin to Pin
Rod End Diameter
Rod End hole Diameter
Clevis Hole Diameter
Pressure Rating
Base Size
Material
INTRODUCTION
The long ram hydraulic jack is ideal for lifting heavy objects. Use it on hydraulic
equipment that requires an extended lift range.
The jack has both a manual and pneumatic method of raising and lowering a
load.
SAFETY
WARNING! Read and understand all instructions before using this tool.
The operator must follow basic precautions to reduce the risk of
personal injury and/or damage to the equipment.
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this manual. A
notice is an alert that there is a possibility of property damage, injury or death
if certain instructions are not followed.
This notice indicates an immediate and specific hazard that will result in
DANGER!
severe personal injury or death if the proper precautions are not taken.
This notice indicates a specific hazard or unsafe practice that could result in
WARNING!
a serious injury if the proper precautions are not taken.
Page 3
CLEVIS-BOTTOM LONG-RAM PNEUMATIC/HYDRAULIC JACK
8 ton
16,000 lb
24-3/4 in.
43-3/4 in.
Pneumatic/hydraulic
19 in.
25-3/8 in.
1.1 in.
0.65 in.
0.65 in.
110 to 120 PSI
7 x 5-1/8 in.
Steel
www.princessauto.com / 1-800-665-8685
9096686