Burner Cap Placement - Thermador PROFESSIONAL PRO HARMONY PRG304GH Guide D'utilisation Et D'entretien

Checking Burner Cap Placement
• Check each burner to make sure there is no gap
between the burner cap and burner base. See
Figure 13 and Figure 14: Correct and Incorrect Burner
Cap Placement to see examples of correct and
incorrect placements of the burner cap.
• You may gently try to move the burner caps from side
to side to check if the caps are properly placed on the
burner bases. When properly placed, each burner cap
will rest flat on top of its burner base, and completely
cover the star-shape of the burner base when viewed
from the top as shown in Figure 13: "Correct Burner
Cap Placement".
Figure 13: Correct Burner Cap Placement
Figure 14: Incorrect Burner Cap Placement
English 14

Burner Cap Placement

Burner Base Burner Base Burner Base
Figure 15: STAR Burner Components
The burner caps must be properly placed on the burner
bases for the cooktop to function properly. If the burner cap
is not properly placed, one or more of the following
problems may occur.
• Burner flames are too high.
• Flames shoot out of burners.
• Burners do not ignite.
• Burner flames light unevenly.
• Burner emits gas odor.
WARNING!
To prevent flare-ups and avoid the creation of harmful
by-products, do not use the cooktop without all burner
caps and all burner grates properly positioned.
WARNING!
To prevent burns, do not touch burner caps or grates
while hot. Turn the cooktop off and allow the burners to
cool.
Burner Cap Burner Cap Burner Cap
Igniter Igniter Igniter