Power Fist 8990848 Mode D'emploi page 5

V1.1
6. Securely hold this tool using both hands. Using a tool with only one hand
can result in loss of control.
SPECIFIC SAFETY
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use
this tool unsafely or incorrectly, you can suffer serious personal injury.
1. Use the correct tool for the job. This tool was designed for a specific
function. Do not modify or alter this tool or use it for an unintended
purpose.
2. Do not use the tool if any parts are damaged, broken or misplaced. Repair
or replace the parts.
3. Use extra caution when nailing or stapling into existing walls or other
blind areas. You may cut objects that can cause kickback, cut an electrical
wire or a water pipe.
POWER TOOL PRECAUTIONS
1. Do not use any power tool with a malfunctioning trigger, power switch
or control. A power tool that fails to respond to the controls is dangerous
and can cause an injury. A qualified technician must repair and verify the
power tool is operating correctly, before it can be used.
2. Shut the power off and disconnect the nailer from the power supply
(if possible) before making any adjustments, cleaning, servicing or when
storing. Such preventive safety measures reduce the risk of starting the
tool accidentally.
3. Avoid unintentional starts. Be sure that the regulator/throttle switch is in
the neutral or OFF position when not in use and before connecting it to
any air source.
AIR TOOL PRECAUTIONS
1. Use only clean and dry compressed air as a power source. Contaminated
or moist air will gradually damage the tool.
2. Discontinue tool use if it does not work properly or air is leaking. Tag or
mark the tool as 'defective' or 'out of service' until repaired.
3. Check the manufacturer' s maximum pressure rating for air tools and
accessories. Compressor outlet pressure must be regulated to never
Page 5
CLIPPED-HEAD FRAMING AIR NAILER
www.princessauto.com / 1-800-665-8685
8990848