Publicité
Les langues disponibles
Les langues disponibles
8990848
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the
Canadian Standards Association (CSA) or American National Standards
Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side protection
for the eyes. Eye protection equipment should comply with CSA Z94.3-07
or ANSI Z87.1 standards based on the type of work performed.
2.
Wear protective clothing and gloves designed for the work environment,
materials and tools.
3.
Non-skid footwear is recommended to maintain footing and balance in the
work environment.
4.
The tool may contain high pressure. Use safety glasses and gloves for
protection during operation. Keep hands clear of the exposed rubber
portions of the hose.
5.
This tool can cause hearing damage. Wear ear protection gear to eliminate
or reduce the noise. If possible add a muffling device to the air tool' s
exhaust.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
1.
Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
2.
Avoid wearing clothes or jewelry that can become entangled with the
moving parts of a tool. Keep long hair covered or bound.
3.
Do not overreach when operating a tool. Proper footing and balance
enables better control in unexpected situations.
4.
Keep your fingers away from the trigger/switch while carrying the tool or
attaching a hose or accessory. Lock the trigger/switch safety if available.
5.
Avoid unintentional starts. Be sure that the regulator/throttle switch is in
the neutral or OFF position when not in use and before connecting it to
any air source.
www.princessauto.com / 1-800-665-8685
CLIPPED-HEAD FRAMING AIR NAILER
V1.1
Page 4
Publicité
