Publicité
Les langues disponibles
Les langues disponibles
1. Product description
The aquarium system PERCULA 100 T5 consists of the following components:
Percula 100
1 x aquarium 101,5 x 66,5 x 61 cm, incl.
•
frame
1 x cabinet
•
2 x sun cover 2 x 39 Watt
•
Cover incl. fans
•
1 x protein skimmer
•
1 x post skimming trickle filter with circulation
•
pump (1,000 l/h)
2 x NanoProp 5000
•
Not included are a heater stick, a wall mounting for the lighting system, a timer and a socket
board.
The power of the required heater stick depends on the temperature of the aquarium environment.
If it is installed in an unheated room, it should have a power output of approx. 250 Watt. In heated
rooms, 100 - 150 Watt are sufficient.
2. Cabinet's assembly (refer to Fig. 1)
The assembly of the cabinet is done according to the following drawing (Fig. 1). The upper plate
hasn't to be screwed on. It has got four retaining blocks at the bottom so that it cannot
slip. Take care that the bore-hole of the cabinet plate is located on the right side of the cabinet.
The door where you can hide the socket board has to be fixed on the right side as well.
3. Set-up of the aquarium
The aquarium can be placed directly onto the cabinet. Beforehand, any dust on the plate should be
removed to avoid a bursting of the bottom glass caused through grains of sand or other coarse
particles.
The cable shaft of the aquarium must be positioned above the bore-hole of the cabinet.
Photo 1: Percula 100 T5
17
Publicité
