Klarstein FULL HOUSE DOWN AIR Mode D'emploi page 72

EN
72
CLEANING AND CARE
Note: Before cleaning, always pull the plug out of the socket and allow the device to
cool down.
What How
Daily con- 1. Turn the hotplate off.
tamination 2. Spray on a hotplate cleaner
on the glass while the plate is still warm
(fingerprints, but no longer hot.
marks and stains 3. Wipe with a damp cloth and
caused by over- dry the plate with a towel.
flowing, non- 4. Turn the hotplate back on.
sugary food
and liquids)
Overcooked, Remove the dirt with a carpet
melted or hot, knife, a razor blade or a
sugary residues scraper for ceramic hotplates,
and splashes on but be careful not to burn
the glass. yourself on the hot hotplate.
1. Turn the hotplate off.
2. Hold the scraper at a 30°
angle and scrape the dirt
into a cold corner of the
hotplate.
3. Remove the dirt with a cloth
or kitchen towel.
4. Follow steps 2-4 under
"Daily contamination".
Spilled food or 1. Turn the hotplate off.
liquids on the 2. Soak the residues.
function keys. 3. Wipe the keys with a damp
cloth, soft sponge or kitchen
towel.
4. Follow steps 2-4 under
"Daily contamination".
Important!
• When the hotplate is
switched off, the "Hot
surface" indicator goes out
even though the hotplate
is still hot. Be careful not to
burn yourself!
• Do not use scouring pads
or abrasives as they may
damage the finish. Check
the package to see if your
cleaning agent is suitable
for ceramic hotplates.
• Do not leave any cleaner
residue on the plate,
otherwise the glass could
tarnish.
• Remove the stains and
splashes immediately, as
they are more difficult to
remove once they have
become cold.
• Attention: risk of injury! As
soon as the safety cover is
removed from the carpet
knife, the sharp knife
will stick out. Handle it
carefully so that you do not
injure yourself.
The hotplate may beep, switch
itself off and the buttons may
stop working while there is
liquid on them. Make sure that
the buttons are clean and dry
before switching the plates
back on.