Klarstein FULL HOUSE DOWN AIR Mode D'emploi page 57

The power supply must comply with national standards. The correct wiring is shown
below:
Notes on electrical safety
• If the power cord is damaged or needs to be replaced, contact the manufacturer,
customer service or a similarly qualified person to avoid a hazard.
• If you connect the unit directly to the mains, attach a multi-pole circuit breaker with
a minimum distance of 3 mm between the contacts.
• The mounting must comply with national regulations.
• The mains cable must not be kinked or twisted.
• The mains cable must be checked regularly for damage by qualified personnel.
• The yellow/green cable must be connected to the earth cable and the terminals of
the unit.
• The manufacturer is not liable for damage caused by missing or improperly
executed earthing.
• The socket used for the appliance must be easily accessible at all times.
EN
57