Hitachi NT 1850DF Manuel D'instructions Et De Sécurité page 19

● Make sure the trigger is locked when not
fi ring nails.
This Nailer has a lock mechanism to prevent the
nails from being fi red.
Set the lock lever at the
trigger.
Slide the lock lever to the
Nailer is to be used, and to the
is not in use.
Trigger
Lock lever
● Never use Nailer unless push lever is operating
properly.
Before actually beginning the nailing work, test the Nailer
by using the checklist below. Conduct the tests in the
following order.
If abnormal operation occurs, stop using the Nailer
and contact a metabo HPT authorized service center
immediately.
(1) REMOVE ALL NAILS AND BATTERY FROM
NAILER.
□ ALL SCREWS MUST BE TIGHTENED.
□ THE PUSH LEVER AND TRIGGER MUST MOVE
SMOOTHLY
WARNING
position to lock the
position when the
position when it
Lock position
Free position
Trigger
Push lever
(2) Installing the battery.
Do not operate the push lever or trigger while
installing the battery.
(3) Turn on the Power switch.
Nailing operation
indicator
Battery indicator
Nailing
operation switch
English
Handle
Battery
Insert
Power indicator
Power
switch
19