Amprobe AT-8020 Mode D'emploi page 11

2. KIT COMPONENTS
Main
applications
Help guide
Setting menu
Buzzer volume adjustment
Home menu
Language
Backlight
Setting
Help Guidance
Sensitivity*
Smart Sensor
TM
Range
*Note: The Auto and Manual sensitivity mode can be easily changed by pressing the + and
– key at the same time when the Receiver is in a tracing mode. When sensitivity mode is set
to "Auto" manual adjustment is disabled.
ENERGIZED:
DE-ENERGIZED:
Figure 2.1b: Overview of home screen elements
x.x.x
Figure 2.1c: Overview of settings menu elements
English, French, Spanish, Portuguese
25%, 50%, 75%, 100%
DEFAULT : Restore default settings
ON : Device will guide you through each mode
OFF : Device will start without guidance
MAN : Manual sensitivity adjustment (+) and (-) keys
AUTO : Auto sensitivity adjustment
SHORT : For wire detection up to 3 feet
LONG : For wire detection between 3 and 20 feet
- -
Sensitivity adjustment
x.x
7
Battery
status