Amprobe AT-8020 Mode D'emploi page 29

4. SPECIAL APPLICATIONS
4.7 Tracing Underground Wires
The AT-8000 can trace wires underground, the same way it can locate wires behind walls or floors.
Perform tracing as described in Energized SMART SENSOR
TIP SENSOR modes.
You can use a hot sick attachment to make tracing more ergonomic and convenient.
4.8 Tracing Low Voltage Wires and Data Cables
The AT-8000 can trace data, audio, and thermostat cables (to trace shielded data cables,
refer to section 4.6).
Trace data, audio, and thermostat cables:
1. Connect the Transmitter using the separate ground method described in section 3.2.
2. Set the Receiver to De-energized TIP SENSOR mode and trace the wire.
Figure 4.7: Tracing underground wires
25
mode or Energized / De-Energized
TM