Step 33
With a hammer, gently tap twelve SHELF SNAPS (8R) into the
å
holes in the ADJUSTABLE DOOR SHELVES (O).
Insert twelve METAL PINS (1R) into the hole locations of your
å
choice in the DOOR END (C) and DOOR UPRIGHT (H). Set the
DOOR SHELVES onto the METAL PINS and push down until each
SHELF "snaps" into the SHELF SNAP (8R).
Push the RUBBER SLEEVES (2R) over sixteen METAL PINS (1R).
å
Insert the METAL PINS into the hole locations of your choice in
the ENDS (A2 and B2) and UPRIGHT (D2). Set the ADJUSTABLE
SHELVES (N and P) onto the METAL PINS.
A2
O
C
H
O
O
www.sauder.com/services
N
P
B2
D2
N
P
1R
(12 used)
422427
LARGE DOOR ON RIGHT
1R
2R
(16 used)
(12 used)
8R
8R
O
Page 39