Publicité
Step 32
Step
å
NOTE: Do not turn the SAFETY DRYWALL ANCHOR (61M) into a wall stud. If you prefer to
fasten the SAFETY STRAP (60M) to a wall stud, go to your local hardware store for
proper hardware.
å
INSTALLATION INSTRUCTIONS:
1. Insert the SAFETY DRYWALL ANCHOR (61M) through the WASHER (13M) and the end of
the SAFETY STRAP (60M).
2. Using a Phillips screwdriver or a hand drill, press the screw slightly onto the drywall.
3. Apply pressure; turn the screw until a pilot hole is made and the nylon sheath slips through.
4. Turn the screw until it is fl ush against the wall and you feel a fi rm resistance.
5. Continue to turn until the screw starts spinning freely.
å
NOTE: Before moving your unit to a diff erent location, unscrew the SAFETY DRYWALL
ANCHOR (61M) from your wall. The nylon sheath will remain behind your wall.
61M
Page 38
13M
60M
422427
LARGE DOOR ON RIGHT
www.sauder.com/services
Publicité
