Publicité
Step
Step 27
Fasten the STRIKE PLATES (6I) to the SMALL DOOR (M).
å
Use two BLACK 1/2" FLAT HEAD SCREWS (11S).
Fasten the PULL (102K) to the SMALL DOOR (M). Use two
å
SILVER 3/4" MACHINE SCREWS (20S).
Fasten the DOOR UPRIGHT (H) and DOOR END (C) to the
å
SMALL DOOR (M). Tighten six TWIST-LOCK® FASTENERS.
NOTE: Use the exact holes shown.
å
Fasten the HINGES (1H) to the DOOR END (C). Use eight
å
BLACK 9/16" LARGE HEAD SCREWS (1S).
BLACK 1/2" FLAT HEAD SCREW
(2 used for the STRIKE PLATES)
www.sauder.com/services
11S
6I
20S
SILVER 3/4" MACHINE SCREW
(2 used for the PULL)
IMPORTANT: The PULL (102K) must
be fastened to the DOOR before the
END and UPRIGHT are fastened.
BLACK 9/16" LARGE HEAD SCREW
(8 used for the HINGES)
H
M
102K
422427
LARGE DOOR ON RIGHT
1S
1H
C
6I
Page 33
Publicité
