CLAS PE 2002T Mode D'emploi page 87

PE 2002T PE 2006T
RESERVED TO THE INSTALLER
CHECK TO BE CARRIED OUT WHEN THE INSTALLATION IS COMPLETE
LIFT MODEL......................................................................
1 CHECKING CORRECT INSTALLATION AND SEALING CAPACITY OF SCREW SECURING LIFT TO FLOOR
2 CHECKING CORRECT ELECTRIC HOOK-UP (ACCORDING TO STANDARDS)
3 CHECK OF CORRECT OPERATION (ACCORDING TO MANUAL)
4 CHECK OF THE ELECTRIC SAFETY DEVICE CORRECT OPERATION
5 CHECK FOR CORRECT EMERGENCY PUSH-BUTTON OPERATION
6 CHECK OF MECHANICAL SAFETY DEVICES CORRECT ENGAGEMENT
7 CHECK OF ARM-LOCK CORRECT ENGAGEMENT
8 CHECK OF FOOT GUARDS CORRECT ASSEMBLY
9 CHECK OF HYDRAULIC SYSTEM PERFECT SEALING
10 CHECK OF THE HYDRAULIC SAFETY DEVICES CORRECT OPERATION
11 CHECK OF OIL LEVEL
12 CHECK FOR EMERGENCY LOWERING OPERATION
13 CHECK OF LABEL APPLICATION ACCORDING TO DIAGRAM
14 CHECK CORRECT LUBRICATION OF THE SLIDING AREAS
15 FULL-LOAD LIFT TESTING
16 TRAINING OF THE PERSONNEL AUTHORISED TO USE THE LIFT
17 CHECK OF DOCUMENTS (instruction manual & Declaration of Conformity)
18 INSPECTION RECORDS FILLING OUT
NOTE
Date
Signature of Installer
PE 2007T
Customer's signature
SERIAL NO.......................................
YES NO NOTES
87