Technical Data; Replacement Items - Beurer LB 88 Mode D'emploi

The mist has a
strange smell.
Strange noise.
Mist escapes from
underneath the
water tank.

11. Technical data

Dimensions (L x W x H)
Cable length
Weight when empty
Mains voltage/frequency
Nominal power
Room size
Maximum capacity
Evaporation output
Signs and symbols

12. Replacement items

Item
10 anti-lime pads
10 aroma pads
Beurer by Taoasis "Vitality" aroma oil (10 ml)
Beurer by Taoasis "Harmony" aroma oil (10 ml)
Beurer by Taoasis "Relax" aroma oil (10 ml)
Beurer by Taoasis "Sleep Well" aroma oil (10 ml)
The device is new.
Stale or dirty water.
The water tank is not positioned
correctly on the base unit.
There is too little water in the water
tank.
The device is not level and unstable. Place the device on a firm, level surface.
The water tank is not positioned
correctly on the base unit.
Approx. 29.5 cm x 19.5 cm x 28 cm
Approx. 1.4 m
Approx. 2.24 kg
220-240 V AC / 50/60 Hz
280 W
2
Up to 48 m
Approx. 6 litres
550 ml/hour
The unit is double-protected and thus corresponds to protection
class 2.
Remove the water tank, turn the screwed plug
and remove it.
Air the open, empty water tank in a cool, dry
place for twelve hours.
Empty the base unit and the water tank and
clean them thoroughly.
Fill the water tank with fresh water.
Lift up the water tank and position it correctly
on the base unit.
The tank should sit tightly on the base unit.
Fill the water tank.
Lift up the water tank.
Check whether the join between the base unit
and water tank is clean.
Clean if required.
Position the water tank correctly on the base
unit.
The tank should sit tightly on the base unit.
Item number
163.141
163.142
681.30
681.31
681.32
681.33
22