Stihl RMA 248.3 T Notice D'emploi page 45

9 Removing and Fitting the Battery
► Hold handlebar (1).
► Press lever (2) downwards and hold.
► Fold up handlebar (1).
► Release lever (2).
The handlebar audibly clicks into place.
8.2 Folding the Handlebar
The handlebar can be folded for space-saving
transport or storage.
► Switch the lawn mower off and remove the
battery.
► Place the lawn mower on a level surface.
► Hold handlebar (1).
► Press lever (2) downwards and hold.
► Fold down handlebar (1).
► Release lever (2).
The handlebar audibly clicks into place.
0478-131-9605-B
8.3 Adjusting the Handlebar
► Switch the lawn mower off and remove the
battery.
► Place the lawn mower on a level surface.
► Hold handlebar (1).
► Press lever (2) downwards and hold.
► Adjust handlebar (1) to the desired position
and make sure the handlebar fully engages
again.
► Release lever (2).
9 Removing and Fitting the
Battery
9.1 Fitting the Battery
► Place the lawn mower on a level surface.
► Take hold of flap (1) by handle (2), open it as
far as it will go and hold it open.
► Push battery (3) into battery compart‐
ment 1 (4) as far as it will go.
The battery audibly clicks into place and is
locked.
► If a second battery is to be carried: press the
battery into battery compartment 2 (5).
The battery audibly clicks into place and is
locked.
► Close flap (1).
9.2 Removing the Battery
► Place the lawn mower on a level surface.
English
45