Adjusting The Air Flow Direction; Powerful Jet Operation - Sharp AH-XP10UHD Mode D'emploi

ADJUSTING THE AIR FLOW
DIRECTION
VERTICAL AIR FLOW DIRECTION
1
Press the SWING button (
• The vertical airflow louvre will swing.
2
Press the SWING button (
to stop at the desired position.
HORIZONTAL AIR FLOW DIRECTION
(For High end models only)
1
Press the SWING button (
• The horizontal airflow louvre will swing.
2
Press the SWING button (
to stop at the desired position.
CAUTION:
Never attempt to adjust the louvres manually.
• Manual adjustment of the louvres can cause
the unit to malfunction.
• When the vertical adjustment louvre is
positioned at the lowest position in the
COOL or DRY mode for an extended
period of time, condensation may result.
NOTE:
• The adjustment range is narrower than the
swing range in order to prevent condensation
from dripping.
INVERTER_OM A881_EN.indd EN-6 INVERTER_OM A881_EN.indd EN-6

POWERFUL JET OPERATION

The air conditioner works at the maximum
power and optimum louvre direction to
).
makes the room cool rapidly.
1
During operation, press the
) again
POWERFUL JET button.
• The remote control will display "
1
• The temperature display will go off.
• The vertical airflow louvre will be set
2
obliquely downward.
TO CANCEL
Press the POWERFUL JET button again.
• The vertical airflow louvre will return to the
original direction.
).
) again
1
2
NOTE:
• The air conditioner will operate at "Extra
cooling power" and "Extra HIGH" fan speed
for 15 minutes, and shift to "HIGH" fan speed.
• You can not set the temperature or fan speed
during the POWERFUL JET operation.
EN-6
".
1
SENSOR
11/8/2559 BE 5:14 PM 11/8/2559 BE 5:14 PM