Adjusting The Air Flow Direction - Sharp AY-XP9GHR Mode D'emploi

ADJUSTING THE AIR FLOW DIRECTION

VERTICAL AIR FLOW DIRECTION
DISPLAY
MODE
1h
CLEAN
FAN
SWING
HORIZONTAL AIR FLOW DIRECTION
Hold the horizontal adjustment
louvre as shown in the diagram
and adjust the air flow direction.
CAUTION
Never attempt to adjust the vertical adjustment louvres manually.
• Manual adjustment of the vertical adjustment louvre can cause the unit to malfunction
when the remote control is used for adjustment.
• When the vertical adjustment louvre is positioned at the lowest position in the COOL or
DRY mode for an extended period of time, condensation may result.
Do not adjust the horizontal adjustment louvre to the extreme left or right in the COOL mode
with the fan speed set to "SOFT (
Condensation may form on the louvres.
1
2
SET/C
)" for an extended period of time.
1 Press the SWING button on the
remote control once.
• The vertical adjustment louvres will
change its angle continuously.
2
Press the SWING button again when
the vertical adjustment louvres are at
the desired position.
• The louvre will stop moving within the
range shown in the diagram.
• The adjusted position will be memo-
rized and will be automatically set to the
same position when operated the next
time.
Adjustment range
COOL and DRY modes
E-10
HEAT mode