Adjusting The Air Flow Direction - Sharp AY-XP7HR Mode D'emploi

ADJUSTING THE AIR FLOW DIRECTION

VERTICAL AIR FLOW DIRECTION
1
Press the SWING button(
mote control once.
• The vertical adjustment louvre will swing con-
tinuously.
2
Press the SWING button(
the vertical adjustment louvre is at the
desired position.
• The louvre will stop moving within the range
shown in the diagram.
DISPLAY
MODE
1h
CLEAN
FAN
Adjustment range
COOL and DRY modes
) on the re-
) again when
1
2
SET/C
HEA T mode
HORIZONTAL AIR FLOW DIRECTION
1
Press the SWING button(
mote control once.
• The horizontal adjustment louvres will swing
continuously.
2
Press the SWING button(
the horizontal adjustment louvres are at
the desired position.
DISPLAY
MODE
FAN
NOTE:
• The adjusted position will be memorized and will be
automatically set to the same position when oper-
ated the next time.
• The sdjustment range is narrower the SWING
range in order to prevent condensation from drip-
ping.
CAUTION:
Never attempt to adjust the louvres manually.
• Manual adjustment of the louvres can cause the
unit to malfunction.
• When the vertical adjustment louvre is positioned
at the lowest position in the COOL or DRY mode
for an extended period of time, condensation may
result.
E-7
) on the re-
) again when
1h
CLEAN
1
2
SET/C